PDT-740B美国Prostat静态衰变计时器哪家价格好

PDT-740B美国Prostat静态衰变计时器哪家价格好

PDT-740B静态衰变计时器

测量电离器和材料的衰变时间

▶用于测量1000伏电荷在十分之一秒内消散到100、50或10伏以下所需的时间

▶用于评估材料、人员、设备和其他产品的静态衰减能力

▶与大多数便携式充电板监测器和现场仪表兼容，模拟输出为±2伏

▶与PFM-711A或PFM-711B现场仪表一起使用

▶可与PGB-745衰变电极或PRF-911同心环一起使用

Designed to measure the time required for a 1,000 volt charge todissipate to less than 100, 50 or 10 volts in tenths of asecond

Used to evaluate the static decay capabilities of materials,personnel, e and other products

Compatible with most portable charge plate monitors and fieldmeters having an analog output of ±2 volts

Used with the PFM-711A or PFM-711B Field Meters

Can be used with the PGB-745 Decay Electrodes or PRF-911Concentric Ring

测量电离器的衰变时间

PDT-740B静态衰变计时器是Prostat创新技术的典型代表，并为专门ESD控制经理和审计员提供支持。

根据ESD协会的电离标准ANSI/ESDSTM3，这种独特的附件设计用于测量电离器从±1000伏到小于100伏的衰减时间。1，并测量小于50伏和小于10伏的材料衰减时间。

评估电离器和包装材料

如果使用得当，PDT-740B可提供衰减时间测量，用于评估电离器、包装材料、鞋类、人员接地、生产辅助设备、一些设备和许多其他ESD控制产品。

与PFK-100B现场仪表组一起使用

PDT-740B静电衰减计时器与Prostat的精密便携式充电板监测器组件一起使用，包括PFM-711B现场仪表、CPM-720B充电板组件和PCS-730B静电充电器。。

使用PGB-745测量材料

为了评估材料和其他产品，建议使用额外的衰变测量附件，例如PGB-745衰变电极或PRF-911同心环夹具。

Measure Decay Time ofIonizers
The PDT-740B Static Decay Timer is typical of Prostat’s innovativetechnology and support of Professional ESD Control Managers andAuditors.

This unique accessory is designed to measure the decay time ofionizers from ±1,000 volts to less than 100 volts in accordancewith ESD Association’s Ionization Standard ANSI/ESD STM3.1, andmeasure material decay time to less than 50 volts and less than 10volts.

evaluate Ionizers andPackaging Materials
Properly used, the PDT-740B provides decay time measurements forevaluating ionizers, packaging materials, footwear, personnelgrounding, production aids, some e and many other ESDcontrol products.

Use it with the PFK-100BField Meter Set
The PDT-740B Static Decay Timer is used with Prostat’s precisionportable Charge Plate Monitor kit components, including thePFM-711B Field Meter, CPM-720B Charge Plate Assembly and PCS-730BElectrostatic Charger..

Measure materials by usingthe PGB-745
For evaluating materials and other products, additional decaymeasurement accessories e.g., PGB-745 Decay Electrodes, or PRF-911Concentric Ring fixtures are recommended.